It’s very frustrating when you see algae growing by your pool. But after all, it’s the price you pay for having such convenience, isn’t it? However, what if we told you there is an easy method to remove algae from the pool screen?
Having a pool at home is probably one of the best investments you have ever made. Don’t let algae be a problem. In this article, we will show you that dealing with this situation can be easier than you imagined.
What’s The Best Way To Remove Algae From The Pool Screen
Depending on how severe is the pool screen decay level, cleaning may be easier or more difficult. However, in general, vinegar is the best option for this task.
Besides, the substance is not as strong as chlorine bleach, which means less chance of damaging the screen.
To clean the pool screen, first, it’s necessary to dilute vinegar in water. Ideally, the correct proportion is fifty-fifty. Mix the solution, then use a sponge or scrub brush to clean the pool enclosure gently until you remove all algae.
Instead of vinegar, it’s also possible to use dish soap. This substance, like vinegar, is milder and the risks of damaging the pool screen (particularly the paint) are smaller.
How To Do It
Below you can see the necessary steps to clean the pool screen:
- Prepare the solution (mentioned earlier) in a bucket;
- Use a brush with soft bristles, soak it in the solution, and gently scrub the surface;
- Rinse the pool screen with your garden hose and allow it to air dry;
Repeat the process if you are unable to remove all algae on the first try.
Another great tip is to do the job one frame at a time. Also, remember that the solution must be warm to help remove the algae more easily.
Can You Pressure Wash The Pool Screen
Using a pressure washer is also a popular method of removing algae from the pool screen. But for this to work, some steps and security measures are necessary.
Most importantly, the water pressure must not be too abrasive; otherwise, it will damage the screen. Furthermore, pressured water alone will not bring a satisfactory result.
To make cleaning with a pressure washer possible, you must first soak a water solution with some product (such as bleach) and let it act on the surface for a few minutes.
However, we don’t recommend this method for a few reasons. First, as we will see below, bleach is a substance that requires care. Second, using the pressure washer badly can damage the pool screen and remove its paint.
Therefore, continue with this method only if you are sure of what you are doing.
Can You Use Bleach?
Another very potent algae removing substance is bleach. However, you should only use the product in those situations where it’s not possible to remove algae conventionally.
When using bleach, it’s crucial to be careful. Always apply the substance in low proportions. Ideally, we recommend using only about one part bleach to 40 parts water.
To clean the pool screen using the bleach+water solution, follow these steps:
- Sprinkle the bleach mixture;
- Let the solution sit for a minute or two and then rinse it off;
Don’t allow the mix to rest on the surface for longer than 15 minutes; otherwise, it can damage the paint.
Also, remember to wear safety equipment, such as gloves and goggles. Bleach is a potent chemical substance with corrosive properties that can cause serious injury to the skin and eyes.
Is It Worth To Remove The Algae Yourself?
Cleaning your pool screen can be a bit of a challenge; You must handle the surface with care. Sometimes doing it yourself is not worth the hustle, as it’s hard to even get to some places you want to clean.
Besides, pool screens can sustain damage if you clean them the wrong way. If you’re in a hurry, maybe cleaning a pool screen is not the right task for you.
The amount you’re going to spend on products, safety equipment, and others ends up stacking up. So, it becomes cheaper to hire a company to do the job.
At 2H Rescreening have more than 17 years of pool screen installation and cleaning experience; We know exactly how to do it, providing a complete level of satisfaction and affordable prices.
Nothing motivates us more than our desire to do every job right the first time.
For a free estimate, please make sure you leave us a message or give us a call, and we’ll get back to you as soon as we can.